Operation; Overview; Safety Reminders - Covidien Nellcor Operator's Manual

4 Operation

Overview

4.1
This chapter identifies methods for viewing and collecting patient oxygen sat-
uration data using the Nellcor™ Bedside SpO
Before operating the monitoring system, thoroughly read this manual.

Safety Reminders

4.2

WARNING:
The monitoring system is intended only as an adjunct in patient assessment.
It must be used in conjunction with clinical signs and symptoms.

WARNING:
Tissue damage can be caused by incorrect application or use of a pulse
oximetry sensor. Do not wrap the pulse oximetry sensor too tightly, apply
supplemental tape, or leave it too long on one place. Inspect the pulse
oximetry sensor site as directed in the Directions for Use to ensure skin
integrity, correct positioning, and adhesion.

WARNING:
Keep patients under close surveillance when monitoring. It is possible,
although unlikely, that radiated electromagnetic signals from sources
external to the patient and the monitoring system can cause inaccurate
measurement readings. Do not rely entirely on the monitoring system's
readings for patient assessment.This device has been tested and found to
comply with the limits for medical devices related to IEC 60601-1-2: 2007.
These limits are designed to provide reasonable protection against harmful
interference in a typical medical installation.

WARNING:
For best product performance and measurement accuracy, use only
accessories supplied or recommended by Covidien. Use accessories according
to their respective Directions for Use.
Patient Monitoring System.
2
25