Prompt Message Repeat Wrapping - Krone Comprima CF 155 XC Original Operating Instructions

Pos: 48.223 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Press-Wickelvorrichtung/Hauptmenüs/Meldungen/Abfragemeldung Wickeln wiederholen @ 218\mod_1390917163355_78.docx @ 1768967 @ 33 @ 1
8.18.3

Prompt message Repeat wrapping

Fig. 146
Prompt message "M3" appears if the function button
to start a second wrapping process.
• Pressing the
stored.
• Press the function button
wrapped again.
Caution!
The film must be cut off before the second wrapping!
Pos: 48.224 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
function button clears the prompt message. The wrapping process is not
GO
to start the second wrapping process. The bale is
KRONE ISOBUS Terminal
GO
is pressed again after wrapping
189