Adjustment Of Bale Firmness (Display For Comprima Cf 155 Xc) - Krone Comprima CF 155 XC Original Operating Instructions

KRONE ISOBUS Terminal
Pos: 48.49 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Press-Wickelvorrichtung/Grundbild/Einstellen der Ballenfestigkeit CF 155 XC @ 52\mod_1289894135828_78.docx @ 506196 @ 33 @ 1
8.3.1

Adjustment of bale firmness (display for Comprima CF 155 XC)

Fig. 84
The value under the bar display and the height of the bar show the current actual bale firmness
as a %. The value above the bar display and the arrows in the bar display show the set target
bale firmness as a %.
The bale diameter is given by the user in basic screen.
• You can use the scroll wheel to select the desired value (the selection box is highlighted in
colour)
• Pressing the scroll wheel allows you to jump to the selection box (the selection box is
highlighted in colour)
• Turning the scroll wheel increases or reduces the value
• Pressing the scroll wheel causes the setting to be applied and returns you from the
selection box
Pos: 48.50 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
118
CC000251