Krone Comprima CF 155 XC Original Operating Instructions page 114

KRONE ISOBUS Terminal
Description of the symbols (II) for the function keys (F7 to F12)
0
Pos: 48.38 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
114
Tying mode, manual triggering
(net)
Tying mode, automatic
triggering (net)
Manual operation
Setting the customer counter
Release holding arms
Close holding arms
The current status is displayed
The main menu "manual operation" is active
when the function key is activated.
The menu 2-1 "Customer counter" is
displayed when actuating the function key
(for settings see menu 2-1 "Customer
counter").
The holding arms are released when the
function key is activated (only for recognized
torn sheet)
When the function key is pressed, the
holding arms are closed (only for recognized
torn sheet).