Move Manually To Tying Position; Activating The Wrapping Table Manually (Only For Comprima Cv150Xc) - Krone Comprima CF 155 XC Original Operating Instructions

KRONE ISOBUS Terminal
Pos: 48.114 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Press-Wickelvorrichtung/Hauptmenüs/Hauptmenü 3 Handbedienung/Bindeposition manuell anfahren @ 53\mod_1289979837625_78.docx @ 507105 @ 33 @ 1
8.10.3

Move manually to tying position

Fig. 110Comprima CF155XC
• Drive engine in feed position by pressing function key
• Drive engine in cut-off position by pressing function key
• Drive engine in tying position by pressing function key
Possible status messages window 2 (net motor), see chapter "Status messages"
Pos: 48.115 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Press-Wickelvorrichtung/Hauptmenüs/Hauptmenü 3 Handbedienung/Fördertisch manuell betätigen @ 53\mod_1289980249343_78.docx @ 507131 @ 33 @ 1
8.10.4

Activating the wrapping table manually (only for Comprima CV150XC)

3-1
0
0
Fig. 111
• Using the softkey
softkey is activated.
• Using the softkey
softkey is activated.
Pos: 48.116 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
150
2
4
R
3
1
CC000282_1
will make the wrapping table convey rearward for as long as the
will make the wrapping table convey rearward for as long as the
4
1
Comprima CV150XC
.
.
0
.
2
3