Communication Settings; Set Communication Mode - NovaStar VX1000 User Manual

Figure 5-46 Factory reset

Reset (Save IP): Reset the parameter settings to factory defaults, except for the communication parameter
settings.

Partial Reset: Reset the parameter settings to factory defaults, except for the communication, Fn and
language settings, imported files and device name.

Reset All: Reset all the parameter settings to factory defaults.

Communication Settings

You can set the communication and network information to enable the device to communicate with the control
PC smoothly.

5.11.1 Set Communication Mode

The VX1000 can communicate with the control PC via either the Ethernet cable or USB cable. If the device is
connected to the control PC via both the Ethernet cable and USB cable, you can select your preferred
communication channel.
Step 1 On the main menu screen, rotate the knob to select Communication and press the knob to enter the
communication settings screen.
Figure 5-47 Communication mode
Step 2 Rotate the knob to select Mode and press the knob to confirm. Rotate the knob again to select the desired
mode and press it to confirm.
The options include LAN Preferred and USB Preferred.

LAN Preferred: The device communicates with the control PC via the Ethernet cable.

USB Preferred: The device communicates with the control PC via the USB cable.
www.novastar.tech
VX1000 All-in-One Controller User Manual
39