Right Eye Start
Signal Delay (us)
Third-Party Emitter
5.8.9 OPT 2 Mode
The VX1000 provides two OPT ports that work in different modes.
OPT 1 is used for input and output.
OPT 2 is used for output only and copies or backs up the data on the 10 Ethernet ports.
On the main menu screen, go to Advanced Settings > OPT 2 Mode to enter the OPT port settings screen.
Figure 5-41 OPT 2 working mode
Copy
The connections in the Copy mode are shown below.
In this mode, the data flow of the connected fiber converter is the same as that of the VX1000.
Figure 5-42 Copy
www.novastar.tech
VX1000 All-in-One Controller User Manual
36