Communication Settings; Language - NovaStar MCTRL 4K User Manual

any operation, then it will go back to the homepage automatically.
Hardware Version
Check the hardware version of this controller. Connect LCT-Mars through PC to
upgrade the firmware program if new versions are released.

Communication Settings

Set communication mode and network parameters of MCTRL 4K.
Communication Settings
Mode Select
Network Settings
Communication modes include USB preferred and LAN(Local Area Network)
preferred. When both USB control interface and Ethernet control interface are
connected to PC, the controller defaults to USB preferred and will control the LED
display via USB interface. Otherwise, the sysytem will control LED display via LAN.
Network Settings include manual and automatic. Please note that IP address
cannot conflict with the address of other devices during manual setting.

Language

Change interface language of the unit.
MC TRL 4 K Us e r ' s M a n u a l
Network Settings
USB Preferred
-12-
Config IPv4
IP Address
Subnet Mask
Reset
Manually