Quick Configuration - NovaStar VX1000 User Manual

Figure 5-2 Screen configuration

5.2.1 Quick Configuration

When the LED screen is a regular one composed of cabinets from the same batch, you can use the quick
configuration function to configure the LED screen.
Prerequisites

The LED screen must be a regular one.

The cabinets of the screen must be regular cabinets with the same resolution.

The following data flow settings are supported. During data flow settings, ensure that each port's physical
connection is along the same direction and downward to the next one.

During data flow settings, ensure that Ethernet Port 1 is at the beginning of the actual physical connection.
Figure 5-3 Data flow
Operating Procedure
Step 1 On the main menu screen, rotate the knob to go to Screen Configuration > Quick Configuration to enter
the quick configuration screen.
Step 2 Set Cabinet Row Qty and Cabinet Column Qty according to the cabinets' actual row and column quantities.
Figure 5-4 Quick configuration
Step 3 Rotate the knob to select Port 1 Cabinet Qty to set the quantity of the cabinets loaded by Ethernet port 1.
www.novastar.tech
VX1000 All-in-One Controller User Manual
11