Factory Reset; Communication Settings; Language - NovaStar VX4S-N User Manual

3 ) Load Cabinet Files.
Load RCFG Files
Save to RV Card
Save to RV Card
All current configurations about the receiving card of the VX4S-N are saved into
receiving card and will not be lost after power fault.
OLED Brightness
Adjust the grayscale of OLED display.
Hardware Version
View the hardware version of the VX4S-N. If new version has been published, LCT-Mars
can be connected via PC and the hardware program of the VX4S-N can be upgraded.

Factory Reset

Reset to factory default setting.

Communication Settings

Set the communication mode and network parameter of the VX4S-N.
The communication modes include USB priority and LAN (local area network) priority.
When the VX4S-N is connected to USB control and LAN control interface simultaneously,
USB takes priority in the settings, adopts USB control; otherwise, LAN takes priority in the
settings, adopts LAN control.
The network parameter can be set both manually and automatically. Ensure that the IP
address is not conflict with other equipment when setting parameter manually.

Language

Switch Language.
V X 4S - N U s e r M a nu a l
-15-
RG 128×128