Appearance - NovaStar VX1000 User Manual

2

Appearance

Front Panel
No. Area
1 LCD screen
2 Knob
3 ESC button
4 Control area
5 Input source buttons
6 Shortcut function buttons
Notes:

Hold down the knob and ESC button simultaneously for 3s or longer to lock or unlock the front panel
buttons.

This product can only be placed horizontally. Do not mount vertically or upside-down.

The product can be mounted in a standard 19-inch rack capable of withstanding at least four times the
total weight of the mounted equipment. Four M5*8 screws should be used to fix the product.
www.novastar.tech
VX1000 All-in-One Controller User Manual
Function
Display the device status, menus, submenus and messages.

Rotate the knob to select a menu item or adjust the parameter value.

Press the knob to confirm the setting or operation.
Exit the current menu or cancel an operation.

Open or close a layer (main layer and PIP layers), and show the layer
status.
Status LEDs:
−
On (blue): The layer is opened.
−
Flashing (blue): The layer is being edited.
−
On (white): The layer is closed.

SCALE: A shortcut button for the full screen function. Press the
button to make the layer of the lowest priority fill the entire screen.
Status LEDs:
−
On (blue): Full screen scaling is turned on.
−
On (white): Full screen scaling is turned off.
Show the input source status and switch the layer input source.
Status LEDs:

On (blue): An input source is accessed.

Flashing (blue): The input source is not accessed but used by the
layer.

On (white): The input source is not accessed or the input source is
abnormal.
Notes:

When a 4K video source is connected to OPT 1, OPT 1-1 has a signal
but OPT 1-2 does not have a signal.

When two 2K video sources are connected to OPT 1, OPT 1-1 and
OPT 1-2 both have a 2K signal.

PRESET: Access the preset settings menu.

TEST: Access the test pattern menu.

Freeze: Freeze the output image.

FN: A customizable button
2