System Settings - NovaStar VX1000 User Manual

Backup
The connections in the Backup mode are shown below.
Figure 5-43 Backup
Note:
When the OPT port works as the backup output port, OPT 2 is used for the connection. Firstly set the OPT 2
mode to Backup, and then make all the connections as shown above. Please pay attention to the Ethernet
port backup relations between the backup device and the primary device.

System Settings

The system settings allow you to set the Fn shortcut button, return to home time, diagnose the device, and
view other related information.
5.9.1 Fn
This function allows you to set a shortcut button for an assigned function. By using the Fn button, you can
quickly navigate to the target menu screen and never need to access a specified menu item by entering the
menus level by level.
On the main menu screen, go to System Settings > Fn and press the knob to enter the Fn button settings
screen. Rotate the knob to select the desired function and press the knob to confirm.
Figure 5-44 Fn button settings
www.novastar.tech
VX1000 All-in-One Controller User Manual
37