Input Backup - NovaStar VX1000 User Manual

Figure 5-30 Primary Ethernet ports
Step 8 Repeat Step 6 and Step 7 to complete the backup settings for other Ethernet ports.

5.8.2 Input Backup

Input backup allows you to set the backup relationship between two input sources. When one input source has
a problem or the input connector fails, the backup source will be used seamlessly and continue to work well to
ensure the LED screen will not go black.
Step 1 On the main menu screen, go to Advanced Settings > Input Backup to enter the input backup settings
screen.
Figure 5-31 Input source backup
Step 2 Rotate the knob to select Status and press the knob to confirm. Rotate the knob again to select On and press
the knob to confirm.
Step 3 Rotate the knob to select the desired input source on the right side.
Input backup rules:

In each backup group, two input sources serve as the backup for each other.

Only the source from the same type of input connector can be set as the backup source.

Each primary or backup source can have only one backup or primary source.

Restrictions on input backup functions:
www.novastar.tech
VX1000 All-in-One Controller User Manual
30