Language - NovaStar VX1000 User Manual

−
When the device is connected to a video processor, OPT 1 is used as an input connector.
−
When the device is connected to a fiber converter or a device working under the Fiber Converter mode,
OPT 1 is used as an output connector.

The HDMI1.3 output connector is used for monitoring with a fixed resolution of 1920×1080@60Hz when
connected to a monitor. If you change the output resolution of this connector, the device will work as a
video processor and the image output by Ethernet ports will be incomplete.

Under this mode, all the LCD menus are available.
Fiber Converter

OPT 1 and OPT 2 are both used as the input connectors.
−
All Ethernet ports output the data that OPT 1 transmits.
−
When OPT 1 and OPT 2 are accessed with different data, the Ethernet ports transmit OPT 1 data.
When OPT 1 data is lost, OPT2 data will be used seamlessly; when OPT 1 data resumes, OPT 1 data
be used as usual again.
Under this mode, only Working Mode, Communication Settings and 语言/Language menus are

available.
Bypass
Under this mode, the device works as an independent controller with no support for video processing
functions.
Only the main layer can be used, and two PIP layers are unavailable.

Language

The language options include English and Simplified Chinese. You can switch to your preferred language.
www.novastar.tech
VX1000 All-in-One Controller User Manual
41