Auto Upgrade Configuration (Auc) Status Menu; Figure 5-52. Auto Upgrade Configuration (Auc) Status Menu - ADTRAN NetVanta 1224 Installation And Maintenance Practice

Total Access 1224 Quad T1 IMA 24-Port DSLAM Installation and Maintenance Practice

Auto Upgrade Configuration (AUC) Status Menu

Auto Upgrade Configuration (AUC) Status
Main Menu\System Management\Code Download
The Auto Upgrade Configuration (AUC) Status menu (see
manually or automatically upgrade the Total Access 1224 firmware. When enabled, the Auto
Upgrade operation performs the following tasks:
• reads the AUC Configuration file from the designated AUC TFTP server
• validates the file
• upgrades the parameters that need to be updated
• updates the unit with new firmware as required
• reboots the unit if new firmware has been downloaded
All required parameter changes will occur first, followed by the checking of each unit for a
required upgrade.
TID: HSVL00001
Unacknowledged Alarms: None
AUC File
Host
C - Clear AUC Status

Figure 5-52. Auto Upgrade Configuration (AUC) Status Menu

The Auto Upgrade Configuration (AUC) Status menu options are shown in
5-78
Method\Auto Upgrade Configuration (AUC) Status\
Auto Upgrade Configuration (AUC) Status
1. AUC Config File
2. AUC Mode
3. AUC Refresh Interval 5
4. AUC Upgrade Retries
5. AUC TFTP Server
Selection :
Comp/Errs/Pend Last Action
2/ 1 MM/DD/YY HH:MM:SS/AUC parsing complete
2/ 0/No MM/DD/YY HH:MM:SS/Update Complete on Host
R - Read AUC File
'?' - System Help Screen
Figure
Total Access 1224
1224.auc
Manual
hour(s)
3
192.168.1.105
/ Status (Current or Last)
S - Start Upgrade Process
5-52) provides methods to
Table 5-50.
61179621L1-5C