General Information; Verification Kit Overview; Kit Contents - Keysight Technologies 85055A User's And Service Manual

Keysight Tecnologies 85055A
Type-N 50 Ω Veification Kit
User's and Service Guide
1

General Information

Verification Kit Overview

The Keysight 85055A 50Ω type-N verification kit provides a set of standards
with known characteristics, traceable to a reference (golden) standard in
Keysight Technologies calibration lab. This set of standards is used to verify
your measurement calibration and also to verify that your PNA system is
operating within its specifications. The frequency range covered by the 85055A
is from 300 kHz to 18 GHz.

Kit Contents

The 85055A verification kit includes the following items:
— 20 dB attenuator
— 50 dB attenuator
— 25Ω mismatch airline
— 50Ω airline
— open-end wrench
— storage box
— User's and Service Guide (this manual)
— USB drive that contains factory-measured verification data for use with the
— data sheet for each device that contains factory-measured verification data
— anti-virus scan report
Refer to
part numbers.
IMPORTANT! Backup copies of the data sheets, anti-virus scan reports,
and the data contained on the USB drive should be made immediately
upon receipt of the verification kit.
PNA system verification process
"Contacting Keysight" on page 5-4 for a complete list of replaceable
1-1