2
Testing Performance
Table 1
List of test equipment (continued)
Equipment
Blocking capacitor
Adapter (qty 3)
50 Ohm Feedthrough
Termination
* Required only for testing digital channels of oscilloscopes that have the MSO option.
Most parts and equipment are available at www.keysight.com. See respective manufacturer's websites for their equipment.
†
These parts available at www.parts.keysight.com at the time this manual was published.
Conventions
The following conventions will be used when referring to oscilloscope models
throughout this chapter.
Table 2
Models
MSO-X /DSO-X 3012G, MSO-X /DSO-X 3014G
MSO-X /DSO-X 3022G, MSO-X /DSO-X 3024G
MSO-X /DSO-X 3032G, MSO-X /DSO-X 3034G
MSO-X /DSO-X 3052G, MSO-X /DSO-X 3054G
MSO-X /DSO-X 3102G, MSO-X /DSO-X 3104G
22
Critical Specifications
Note: if a BNC blocking capacitor is not available use
an SMA blocking capacitor.
N(m) to BNC(f)
Ω
50
BNC (f) to BNC (m)
Conventions
Recommended Model/ Part Number
Keysight 11742A +
Pomona 4289 +
Pomona 5088
Keysight 1250-0780
Keysight 0960-0301
Referred to as:
100 MHz Models
200 MHz Models
350 MHz Models
500 MHz Models
1 GHz Models
3000G X-Series Oscilloscopes Service Guide