E Game Assignments; F Volume Setting - Sega Airline Pilots Owner's Manual

E. GAME ASSIGNMENTS
Selecting the GAME ASSIGNMENTS in the MENU mode causes the present game settings
to be displayed and allows game setting changes (game difficulty, etc.) to be made. After setting
changes, be sure to exit from the TEST mode; the settings are not renewed until the TEST mode is
exited.
SETTING CHANGE PROCEDURE
1 Press the SERVICE BUTTON to move the "->" to the desired item.
2
Change to the desired setting by using the TEST BUTTON.
3 To return to the MENU mode, move the arrow to EXIT and press the TEST BUTTON.
GAME ASSIGNMENTS
GAME DIFFICULTY (TRAINING)
GAME DIFFICULTY (FLIGHT)
-> EXIT
SELECT WITH SERVICE BUTTON
PRESS TEST BUTTON TO EXIT
F. VOLUME SETTING
When VOLUME SETTING is selected, the following appears on the screen and each Control Unit's Volume
can be set.
If the operability is unsatisfactory, or when adjusting or replacing the Volume, set the Volume in this mode.
VOLUME SETTING
CONTROL WHEEL (AILERON)
CONTROL WHEEL (ELEVATOR)
RUDDER PEDAL
THRUST LEVER L
THRUST LEVER R
EXIT WITH
--> EXIT WITHOUT SAVE
SELECT WITH SERVICE BUTTON
PRESS TEST BUTTON TO EXIT
NORMAL
NORMAL
MIN MAX NEU
50H 80H BFH
(20H) (DFH) (BOH)
50H 80H BFH
(20H) (DFH) (BOH)
50H 80H BFH
(20H) (DFH) (BOH)
50H 80H
(20H) (DFH)
50H 80H
(20H) (DFH)
SAVE
GAME DIFFICULTY (TRAINING)
Sets the game difficulty for the TRAINING Mode.
Game difficulty can be set from among the 5 categories, i.e.,
VERY EASY, MEDIUM EASY, NORMAL, MEDIUM
HARD, and VERY HARD. Specifically, this varies the
qualifying points in the TRAINING Mode.
GAME DIFFICULTY (FLIGHT)
Sets the difficulty for the FLIGHT Mode.
Game difficulty can be set from among the 5 categories, i.e.,
VERY EASY, MEDIUM EASY, NORMAL, MEDIUM
HARD, and VERY HARD. Specifically, this varies the initial
time for each course in the FLIGHT Mode.
METHOD OF VOLUME SETTING
•To perform Volume setting, move all Volumes
from the minimum value to the maximum value
and select "EXIT WITH SAVE" and the status of
the CONTROL WHEEL and RUDDER PEDAL
are returned to the horizontal (neutral) position.
•If "EXIT WITHOUT SAVE" is selected, the
setting is cancelled. The values in parentheses
have already been saved.