Settings - Omicron Lab SPECTANO 100 User Manual

10.7

Settings

The following table describes the general test settings.
Table 10-9
SPECTANO Analyzer Suite supports testing with the following test cell
configurations:
•
•
•
The following table describes the test cell settings.
Table 10-10
1. Depends on the test cell type selected under Test cell configuration.
General test settings
Data
General test information
Tester name
Date / Time
General test settings
Waiting time between
measurements
Test cell with disk electrodes (mostly for liquids)
Test cell with cylindrical electrodes
Others
describes the test cell settings.
Test cell settings Test cell settings cell settings
Data
Test cell configuration onfiguration
Guard ring uard ring
Coated Coated ated
1
Test cell settings t cell settin
Coating material Coating m Coating material
Electrode material Electrode Electrode materia
Coati Coating diam Coating diameter (d)
Electrode diameter (d) Elec
Inner diameter of sample I
(d )
1
Outer diameter of sample
(d )
2
Guard gap (g)
Electrode length (l)
Gap guard to coating
SPECTANO Analyzer Suite
Description
Name of the tester
Date and time of the test execution
Time interval between successive measurements een successive measurements
if more measurements are performed in a test run ements are performed in a test r
testing with ith the following test ce
es (mostly for liquids) stly for liquids)
electrodes es
the test cell settings
Description escri
Select Select the Guard ring check box for a test cell
with with guard ring
Select the Coated check box for a coated test cell
Coating material of the test cell
Material of the test cell's electrode
Diameter of the coating located between the
electrodes and the sample or between the
electrodes/guard ring and the sample
Diameter of the test cell's electrode
Inner diameter of the material sample
Outer diameter of the material sample
Gap of the guard ring
Length of the test cell's electrode
Gap between guard ring and coating layer
execution
cces
are performed in
lowing t
51