Ethernet Modem Configuration [6731] - ProMinent Splash Control Pro 2 Assembly And Operating Instructions Manual

7.5.6 Ethernet modem configuration [6731]

Communication programming instructions
mysyclope
Mysyclope settings
Server display field
Port
Connection
APN-GSM connection
Fig. 63: MYSYCLOPE configuration [5731]
Server address www.mysyclope.com
Input of the address of the mysyclope web server. Here is the
n
address (www.mysyclope.com).
Press the key (www.mysyclope.com) to open the alphanumeric
n
keyboard and enter the required value.
Port 18882
Input of the TCP connection port to the mysyclope website.
n
This is the connection port (18882).
Press the port key to open the alphanumeric keyboard and
n
enter the required value.
Remote code 1234
Input of the remote connection code from mysyclope to your
n
device. This is the remote connection code (1234).
Press the remote code key to open the numeric keyboard and
n
enter the required value.
Connection No
Selection of the connection mode to mysyclope (type of
n
modem). Press this key to change the selected mode.
APN-GSM connection
If you choose a connection with a GSM modem, you need to
n
enter the APN code of your data card here.
Press the APN-GSM connection key to open the alphanumeric
n
keyboard and enter the required value.
Saving
When a change has been made, the "Save" button (disk
n
symbol) appears, which you need to press to save your config‐
uration.
Press Ethernet modem to open the following screen.
www.mysyclope.com
18882 Remote code
No
1234
A3059
67