User' - 'Inputs Test' Menu - ProMinent Splash Control Pro 2 Assembly And Operating Instructions Manual

'USER' programming screen

'User' - 'INPUTS TEST' menu

9.6
112
'Upload history' : Not yet available.
'configuration' : The button is enabled if a configuration
Download
'Download configuration' .
file is available. Press
Download configuration(s)
Check the packages to be imported.
User
Communication
Installation and settings
No
Fig. 122: Selection of the configuration packages
When you are on the main screen and insert a USB stick with an
update, a window automatically opens asking if you want to switch
to the programming screen.
The menu lets you set the display of raw and measured data for all
selected inputs.
Inputs test
PI1 0 mV 7.00 pH value
pH value Offset 0 mV
PI2 0 mV
Not used
AI1 0.03 mA
Free chlorine Offset 0.0 m
AI2 ----- mA
Not used
AI3 15.00 mA
Temperature Offset 0.0 mA
AI4 ---- mA
Not used
Fig. 123: 'User' - 'INPUTS TEST' menu by way of example
Yes
DI1 Open
Slope 100 %
Water circulation
DI2 Close
R.C.I. command
---- mg/l
DI3 Close
Slope 100 % Other
DI4 Close
Liquid level of tank
29.4 °C
Slope 100 %
F1
PO1 Output fuse
F2
PO2 Output fuse
A3181
A3182