ProMinent Splash Control Pro 2 Assembly And Operating Instructions Manual page 22

Installation and assembly
0.01... 0.1...1
0.5 mg/l
mg/l
Free -•
bro‐
mine
Per‐
acetic
acid
Ozon
e
Dis‐
solved
oxyge
n
PHMB
* The customer's scale can be defined between 0 ... 2000 (ppb, ppm, NTU, µg/l, mg/l, g/l or %)
Connecting the sensors
Connecting the sensor to AI1:
Connecting the sensor to AI2:
Analogue inputs 4...20 mA uninsu‐
lated AI3 & AI4
Tab. 4: The supported sensors are defined as follows:
Turbidity
(*): The customer's scale can be defined between 0 ... 2000 (NTU or FNU).
22
0.02... 0.1...5 0.2...1
2 mg/l mg/l 0 mg/l
-• -•
-•
-•
1. Use a two-lead cable.
2. Connect the sensor (+) lead to the connector AI1 + (5).
3. Connect the sensor (-) lead to the connector AI1 - (6).
4. Tighten the cable gland to form a seal.
5. Use a two-lead cable.
6. Connect the sensor (+) lead to the connector AI1 + (7).
7. Connect the sensor (-) lead to the connector AI1 - (8).
8. Tighten the cable gland to form a seal.
Fig. 11: A3001
The device has two analogue inputs 4 ... 20 mA, which are not
insulated and to which an insulated temperature, conductivity, tur‐
bulence, flow or volume sensor can be connected.
0.2 ... 100 NTU
-•
0.4...1 0.2...2 0.5...5
5 mg/l 0 mg/l 0 mg/l
-•
Customer*
-•
1...10 2...20 20...2
0 mg/l 0 mg/l 000
mg/l
-• -•
-•
Cus‐
tomer
*
-•
-•
-•
-•
-•
A3001