Tcp/Ip Panel - Extron electronics DTP3 T 202 User Manual

TCP/IP Panel

The TCP/IP panel connects PCS to the device using the internal IP address.
Figure 30.
To connect to the online device.
1. Click the TCP/IP tab (see figure 30,
In the IP Address/Hostname field (
2.
fixed at 203.0.113.22).
In the Password field (
3.
NOTES:
•
•
In the Port field (
4.
the port if blank.
5. Click the Connect button (
page).
Comm Port Selection Window
), enter the device password.
3
The factory configured passwords for all accounts on this device have been
set to the device serial number. In the event of a complete system reset, the
passwords convert to the default, which is extron for the Admin and User.
Select the Show Characters checkbox (
characters.
), enter the connected port or leave the field blank. PCS scans for
4
). The device main page opens (see
6
DTP3 T 202 / DTP3 R 201 • Product Configuration Software
).
1
), enter the IP address of the device (which is
2
) to display the password
5
figure 31 on the next
32