Extron electronics DTP3 T 202 User Manual page 22

The first screen offers to connect to Windows Update to search the web for the
appropriate driver needed for the USB port to communicate with the device. This is not
necessary if the USB driver is already on your PC.
Figure 11. Found New Hardware Wizard Welcome Screen
2. Click on the appropriate radio button (see figure 11):
Select the Yes, this time only radio button (
•
connect to Windows Update only this one time.
Select Yes, now and every time I connect a device (
•
computer to automatically connect to Windows Update to search the web every
time the transmitter or receiver is connected to this USB port.
Select No, not this time (see
•
want the computer to connect to Windows Update to search the web at this time
(for example, if the driver is already on your computer).
3. Click Next ( ).
4
The next screen of the Wizard opens:
1 1
Figure 12. Installing the Software Automatically
1
2
3
4
) if you want your computer to
1
figure 11, ,on the previous page) if you do not
3
2 2
DTP3 T 202 / DTP3 R 201 • Installation and Operation
) if you want the
2
14