Panel Features And Connections; Transmitter Input Connections - Extron electronics MTP AV Series User Manual

Panel Features and Connections

Transmitter Input Connections

Figure 8 shows all of the combinations of video and audio input connectors that you may
encounter with your MTP transmitter.
Figure 8.
a
b
c
INPUT
L R
3
S-VIDEO
OUTPUT
12V
0.5a MAX
MTP T SV A
MTP T SV A,
1
Rear Panel
INPUT
4
L R
S-VIDEO OUTPUT
12V
0.5a MAX
MTP T SV A RCA
MTP T SV A RCA,
1
Rear Panel
2
VIDEO
IN
Video and Audio Input Connections
S-video connector (SV models) — Connect an S-video input to this 4-pin mini DIN
connector.
Composite video connector (AV models) — Connect a composite video input to this
connector (female RCA on the MTP T AV AAP, female BNC on all other models).
Audio input captive screw connector (MTP T SV A, MTP T AV) — Connect a
balanced or unbalanced audio input to this 3.5 mm, 5-pole captive screw connector.
Connectors are included with each MTP, but you must supply the audio cable. See
figure 9 to wire a connector for the appropriate input type. Use the supplied tie-wrap to
secure the audio cable to the extended tail of the connector.
NOTE: High impedance is generally over 800 ohms.
Tip
Sleeve
Tip
Sleeve
Unbalanced Stereo Input
Captive Screw Input Connector Wiring
Figure 9.
INPUT
L R
3
VIDEO OUTPUT
12V
0.5a MAX
MTP T AV
MTP T AV,
2
Rear Panel
INPUT
4
L L R
VIDEO OUTPUT
12V
0.5a MAX
MTP T AV RCA
MTP T AV RCA,
2
Rear Panel
4
R L
AUDIO IN
MTP T AV
MTP T AV AAP,
Front Panel
Tip
Ring
Sleeves
Tip
Ring
Balanced Stereo Input
MTP AV Series • Installation
Do not tin the wires!
7