Table of Contents
Advertisement
PowerCage Front Panel Port, Control, and Indicators
The following features are on the front panel of the PowerCage enclosure (see figure 10).
Figure 10.
a
b
c
d
1
2
3
14
15
COMM
POWER
ALARM
1
2
3
PowerCage Front Panel Features
Comm LED (16 board locations) — This LED lights to indicate that the board at this
location is selected for connection to the Configuration port (
item
Comm Select button (
d
Power LED (all locations) — This LED lights to indicate that power is applied to the
device at this location.
Alarm LED (16 board locations) — This LED lights to indicate that light is not received
on the Rx connector of the board at this location.
Alarm LED (2 PS locations) — This LED lights to indicate that the power supply has
failed or is out of tolerance.
Alarm LED (2 Fan locations) — This LED lights to indicate that the fan has failed.
Comm Select button — Repeatedly press this button as necessary to select the receiver
for connection to the Configuration port (
lights.
PowerCage FOX SR HDMI Scaling Receiver • Installation and Operation
16
PSU
PSU
FAN
FAN
COMM
1
2
1
2
SELECT
4
) as necessary to select the desired board.
item
). The Comm LED (
e
TEMP
CONFIG
PowerCage 1600
5
6
item
e
). Repeatedly press the
item
) for the receiver
a
11
Advertisement
Table of Contents
