Tcp/Ip Panel - Extron electronics DTP3 T 202 User Manual

TCP/IP Panel

The TCP/IP panel connects PCS to a specific device through IP over USB.
Figure 19.
1. Click the TCP/IP tab (see figure 19,
In the IP Address/Hostname field (
2.
NOTE: The IP address (203.0.113.22) is fixed and cannot be changed.
3. In the Password field (
NOTE: The factory configured passwords for all accounts on this device have
been set to the device serial number. In the event of a complete system reset, the
passwords convert to the default, which is extron for Admin and User.
4. In the Port field (
port if blank.
NOTE: Select the Show Characters checkbox (
characters.
5. Click the Connect button (
Comm Port Selection Window
1
), enter the device password.
3
), enter the port number or leave the field blank. PCS scans for the
4
). A new device tab opens.
6
DTP3 T 202 / DTP3 R 201 • Product Configuration Software
).
), enter the IP address of the desired device.
2
) to display the password
5
25