Updating Firmware On A Dtp3 Device - Extron electronics DTP3 T 202 User Manual

Figure 18.
4. Click the letter D from the alphabetic navigation bar (see figure 18,
5. Scroll down the page until you find the firmware for the transmitter or the receiver.
6.
Click Release Notes for more information about the program (optional).
7. Click the Download link on the right.
8. Follow the on‑screen instructions to download the firmware. Make a note of where the
firmware file is stored on the PC.
ATTENTION:
•
•

Updating Firmware on a DTP3 Device

1.
Download the latest version of the firmware to your PC.
2. Connect the PC to the device via the front panel USB port (see
Front Panel USB Port
3. Open the Firmware Loader via the Firmware Loader icon installed during the
download (optional) or your desktop Start menu by making the following
selections:
Start > All Programs > Extron Electronics > Firmware Loader > Firmware
Loader
The Firmware Loader window opens. The Add Device... window opens in front (see
figure 19).
Figure 19.
Firmware Page with Alphabetic Navigation Bar
The extension of the firmware file must be .eff. Opening a file with an incorrect
extension may cause the device to stop functioning.
L'extension du fichier firmware doit être .eff. Si un fichier est ouvert avec une
mauvaise extension, l'appareil peut arrêter de fonctionner.
on page 13) of the transmitter or receiver.
Opening Firmware Loader
DTP3 T 202 / DTP3 R 201 • SIS Configuration and Control
).
1
Connecting to the
25