Extron electronics DTP3 T 202 User Manual page 29

Command
TMDS Audio Output Mode
Enable TMDS Audio Output
Disable TMDS Audio Output
TMDS Audio Output Status
X! = Audio output mode status
KEY:
Firmware
Query firmware version
Query firmware version w/build
Unit Name
Set unit name
Set unit name to factory default
Query unit name
X# Text string of up to 24 characters (Default = DTP3‑T‑202
KEY: =
Alphanumeric characters and hyphens only
No distinction between upper and lower case
No spaces
First character must be a letter and the last character cannot be a hyphen
Password
Set administrator password
Clear administrator password
Query administrator password
Set unit password
Clear user password
Query user password
X1%
KEY: = Password: Maximum length is up to 128 characters. All human‑readable characters are except "|". Passwords
are case‑sensitive and cannot be a single space
NOTES:
•
The factory configured passwords for all accounts on this device have been set to the device serial number. In the event of a
complete system reset, the passwords convert to the default, which is extron.
•
A user password cannot be assigned if no administrator password exists; the E14 error code is returned. If the administrator
password is cleared, the user password is also removed.
ASCII Command Response
(host to unit) (unit to host)
E
AfmtO1
}
O1AFMT
E
AfmtO0
}
O0AFMT
E X!
}
OAFMT
AfmtO
Verbose mode 2/3
0 = Off/Disabled
Q/q
x.xx
*Q/q
x.xx.xxxx
E X#
CN } Ipn
E
Ipn
•
CN }
Ipn
E X#
CN }
Ipn
Verbose mode 2/3
E X1%
CA } Ipa
E
Ipa
•
CA }
E X1%
CA }
Ipa
Verbose mode 2/3
E X1%
CU } Ipu
E
Ipu
•
CU }
E X21%
CU }
Verbose mode 2/3 Ipu
DTP3 T 202 / DTP3 R 201 • SIS Configuration and Control
]
]
]
X!
]
1 = On/Enabled (default)
]
]
X#
•
]
•
DTP3‑T‑202 ]
•
DTP3‑R‑201 ]
]
X#
• ]
or
DTP3‑R‑201).
X1%
•
]
•
]
]
X1%
]
X1%
•
]
•
]
]
X1%
]
Additional Description
Firmware version with 2
decimals.
21