Connecting To Pcs; Device Discovery Panel - Extron electronics DTP3 T 202 User Manual

4.

Connecting to PCS

The Extron Product Configuration Software opens with the Device Discovery screen (see
figure 29). Connect to the device using the Device Discovery panel or the TCP/IP panel
(see
NOTE: An Extron Insider account is required to run PCS.

Device Discovery Panel

1.
2.
3.
4.
5.
Figure 28.
PCS Software Download Link
Click Download (see figure 28,
figure 30 on the next page).
Ensure that PCS is installed on the control PC (see
previous page).
Connect the control PC to the device. The Windows‑based PCS communicates with
the device via the front panel configuration port with a standard USB‑C port (see
Connecting to the Front Panel USB Port
Open PCS on the control PC from the PCS icon loaded on the desktop or from the
Start menu click Start > Programs > Extron Electronics > Extron Product
Configuration Software.
PCS opens to the Device Discovery screen (figure 29).
Figure 29. PCS Device Discovery Screen
Select the device by clicking on it to highlight it in the list (
Click Connect ( ).
2
PCS opens to the device main menu (see
DTP3 T 202 / DTP3 R 201 • Product Configuration Software
) and follow the on‑screen instructions.
1
Software Installation
on page 13).
1
figure 30 on the next page).
on the
).
31