Updating Firmware Using Pcs - Extron electronics DTP3 T 202 User Manual

About Extron PCS
Display information about the current PCS version.
1.
2.
3.
4.
Exit
Disconnect connected devices and close the application.
1.
2.

Updating Firmware Using PCS

Firmware for the device can be updated using PCS (see the device PCS help file).
From the Software menu, select About Extron PCS (see
35). The About ‑ Extron PCS dialog box opens (see figure 37).
Figure 37. About - Extron PCS Dialog Box
Click the Details button (
1
To display details about third‑party software packages and associated licensing, click
Licenses ( ).
2
Click the OK button ( ) to close the dialog box.
3
From the Software menu, select Exit (see
are open, the Exit dialog box opens (see figure 38).
Figure 38. Exit Dialog Box
Click the Close Session(s) and Exit button (
connected devices, close all offline device tabs, and close the software.
Alternatively, click the Cancel button (
DTP3 T 202 / DTP3 R 201 • Product Configuration Software
) for more information.
figure 33,
6
) to disconnect the software from
1
) to leave the software open.
2
figure 33, , on page
5
, on page 35). If device tabs
36