Extron electronics DTP3 T 202 User Manual page 34

In the Add Device window, select the device from the Device Names drop‑down list.
4.
5. From the Connection Method drop‑down list, select TCP/IP.
6. In the IP Address/Hostname field, enter the IP address of the desired device.
NOTE: The IP address is 203.0.113.22. This IP address cannot be changed.
7. Enter the device password in the Password field.
NOTE:
• The factory configured passwords for all accounts on this device has been
set to the device serial number. In the event of a complete system reset, the
passwords convert to the default, which is extron for the Admin and User.
• Do not toggle the LAN or USB ports off if the port is being used to
communicate with the device.
8. In the Port field, enter the Telnet port of the device.
NOTE: The port number is 23.
9. Click Connect (see figure 20,
displayed in green in the Connected Device section, followed by a check mark (
Figure 20. Add Device Window
10. Click the Browse button (
). If the connection is successful, the unit name is
1
) in the New Firmware File (Optional) section.
3
DTP3 T 202 / DTP3 R 201 • SIS Configuration and Control
).
2
26