Start-Up Module Assembly (Suma), Start-Up Module (Sum), And Sensor Cable Preparation And Installation; Step 1; Step 2 - Optex Fiber SenSys Terrain Defender TD 100 Installation Manual

Start-Up Module Assembly (SUMA), Start-Up Module (SUM),
and Sensor Cable Preparation and Installation

Step 1

Remove the cover and endplate caps from the SUMA.

Step 2

Remove two cable port tabs offset from one another for example, top left port and the lower
right port. First, score the edges of each tab several times with a utility knife, then remove
each tab by pulling it outwards from the SUMA with pliers.
Page 37
Figure 32. Tool Kit contents
Figure 33. SUMA with cover and endplate caps being removed
Confidential – Limited Distribution