Precautions When Mounting This Sensor - Optex CVS2 Instruction Manual

Precautions When Mounting This Sensor

• Mount the sensor leaned by 5°-45° so that
lighting should not be reflected by a work.
5°-45°
• Detection may become successful by changing
the setting even if a detected image is
displayed as shown in the right figure.
See "Changing Set Value" on Page 48.
Tilt the sensor by 10°-40° to avoid the mirror reflection when a
work is shiny.
• Take caution so that the external lighting (light
from fluorescent light, etc.) is not reflected.
8
Ramco Innovations
Work
www.optex-ramco.com phone 800-280-6933