Table of Contents
Advertisement
6. TDR8 Relay Module
The TDR8 Relay Module connects to the TD100 and has available four inputs and eight
outputs. Inputs will be annunciated via the Master Controller interface. Outputs are programable
and are set by specifying a detected meter range per relay. This setting may be configured in
the Master Controller or TD100 WUI. Voltage ranges for the relay outputs are also configurable.
Input (4 Selectable)
TD100 RJ-45 Connection
Output (8 NO/NC)
Figure 66. TDR8 relay module connections
Confidential – Limited Distribution
Page 54
Advertisement
Table of Contents
Troubleshooting
