Step 11 - Optex Fiber SenSys Terrain Defender TD 100 Installation Manual

Figure 46. Setting the second adjustable blade ringer to a safe cutting depth
Figure 47. Ring cutting the shield and foam dielectric with adjustable blade ringer tool placed on the material to
CAUTION: The cable shield and drain wire must not contact the center conductor, which
will cause a short on the system. Be sure after stripping the dielectric that the shield has
not been compressed toward touching the center conductor.

Step 11

Trim center conductor using the coaxial cable cutter,
first strip mark as shown in
Page 44
be removed
Figure 40.
Figure 41, to 45 mm (1.77 in) from
Confidential – Limited Distribution