Optex Fiber SenSys Terrain Defender TD 100 Installation Manual page 19

This Introduction to TD100 provides the background for the reader to be ready to understand
and appreciate the detailed information provided in the following manuals:
1. Installation Manual – Describes how one should design and install TD100 at a specific
site. It addresses how to install the cables and other components to optimize the sensor
performance at that site.
2. Web User Interface (WUI) Manual – The TD100's Web User Interface (WUI) is a direct
connection with the processor using a web browser. While some of its features are in
common with those available using the Master Controller, the WUI is even more
detailed. The manual walks through the pages and tabs with example screen captures
and descriptions of how each feature can be used.
3. Master Controller Manual – Most sites with more than a couple of processors will
benefit from a Master Controller. It provides the interface to the outside world. Often it is
via a custom software interface to a Head-End Display and Control system. On other
occasions, it drives a relay interface. Most importantly, it improves system performance
and provides maintenance and diagnostic tools addressing all the processors from the
Head-End location. The manual steps through all the pages and tabs, showing screen
captures and describes how each feature can be used.
This section contains information to help ensure safety and the proper operation of equipment.
Please follow these instructions carefully and keep them accessible for future reference. When
using the TD100, use only attachments and accessories that have been specified by Fiber
SenSys, and refer all servicing to qualified personnel.
Page 19
Confidential – Limited Distribution