Table of Contents
Advertisement
3-2
Sensor Installation Recommendations
Install the pole for the sensor in the following layout configuration. The sensor will not work correctly unless its
installation direction and height are correct.
Installation height: 500mm(19.69in.) from the ground to the bottom of the sensor
Installation angle: 90 degrees to the vehicle direction of travel.
Two way traffic lane : Install the sensor on the the lane of traffic you wish to monitor.
The sensor cannot detect a vehicle in the opposite lane.
Road not to
be detected
Road to
be detected
NOTE
90°
Sensor
Two way traffic lane : To use the sensor for a two-way traffic road, adjust the sensing
●
distance so that the detection area should not cover the opposite lane (see P.13 "4-2.
Setting Verification and Modification").
Road not to
be detected
Road to
be detected
Always install the sensor on the vertical pole that is mounted in or on the ground.
●
Installing a sensor on a tilted pole will result in a detection of the ground by the sensor
and correct operation is not ensured.
Tilted Pole
Vehicle Path
Road not to
be detected
Road to
be detected
Microwave Sensor Detection Area
Ground
-5-
Advertisement
Table of Contents
