Optex Fiber SenSys Terrain Defender TD 100 Installation Manual page 85

TD100™ Processor
Lead Processor
Middle
Processor
End Processor
TD24PSU
TD48PSU
Terrain Defender
Sensing Cable (TDSC)
TDSC 400M
TDSC Repair Kit
TD Outdoor Enclosure
TDR8 Relay Module
TD Tool Kit
Web User Interface
(WUI)
Page 85
Terrain Defender Buried line sensor for intrusion detection.
P# 980-34227
The first processor in any Terrain Defender system.
Kit P# 980-04345
A processor in a multi-processor site located between the Lead
and End.
Kit P# 980-14346
The last processor in a Terrain Defender system with more than
one unit.
Kit P# 980-24347
A 24VDC Power Supply Unit that distributes power to SUMA. Can
daisy-chain up to three TD100 processors. Features battery
backup capability with AC fail and low battery outputs. Includes
enclosure.
P# 980-64560
A 48VDC Power Supply Unit that distributes power to SUMA. Can
daisy-chain up to six TD100 processors. Comes with enclosure.
P# 980-94233
Direct-bury sensor cable for use with the TD100 buried line
intrusion detection system.
A 400 m (1312 ft) spool of TDSC for creating a single < 200 m (3.3
– 656 ft) zone. Order a pair for zones 200 – 400 m (656 – 1312 ft)
in length.
Includes buried line caution tape.
P# 600-44558
Terrain Defender Sensing Cable Repair Kit includes two
enclosures, two splice boxes with terminal blocks, and a 10-meter
cable segment.
P# 980-54262
Vented outdoor enclosure designed for use with the TD100
processor.
P# 980-84232
I/O relay unit connecting to the TD100 via ethernet cable with 8
programmable outputs and 4 inputs.
P# 980-64241
Tool kit with all the tools needed for TDSC preparation and SUMA
flash testing.
P# 980-64263
Direct TCP/IP connection with the TD100 processor using a web
browser for accessing calibration, detection settings, and more.
Confidential – Limited Distribution