Td100 Led Status Table; Elevated Nuisance Alarms - Optex Fiber SenSys Terrain Defender TD 100 Installation Manual

TD100 LED Status Table:

Stage
Bootloader
Initialization
Initialization
Initialization
Operating
Warning
Tamper
Password
Editing enabled
For issues indicated via LED, refer to the TD100 WUI manual for troubleshooting steps.

Elevated Nuisance Alarms:

Nuisance alarms can be caused by numerous sources such as improper installation,
flowing water, or medium-sized animals.
As with any alarm system finding the nuisance source is the first objective. If the nuisance
source can be eliminated or resolved, this is always better than adapting for the issue with
tuning, which can affect the Probability of Detection (PD).
If unavoidable environmental effects cause the nuisance alarms, follow the tuning process
outlined in the WUI manual. During and after the tuning process, refer to
For troubleshooting assistance, contact Fiber SenSys Technical Support Service: telephone, 1-
503-726-4455; email, support@fibersensys.com; or go to the Fiber SenSys website,
www.fibersensys.com
Page 78
Task
Waiting/Programming
Power up, waiting for
ethernet
Failure
Synchronizing
Armed
Warning/Alert
TD100 cover
removed
Passwords at default
and editable for 10
minutes
Color 1 Color 2
Red
Blue
Red
Blue Green
Green
Green Red
Red
Blue Green
Confidential – Limited Distribution
Color 3
Red
Intrusion Testing.