Step 20; Step 21; Suma Flash Testing; Step 2 - Optex Fiber SenSys Terrain Defender TD 100 Installation Manual

SUMA Flash Testing

Step 1
With the SUMA completed and enclosure lid fully secured using a 3/8 in (9.5 mm) nut
driver, remove the air valve cap from the cover.
-

Step 2

Pressurize the enclosure up to 5 psi. A pump and pressure gauge will be needed.
CAUTION: Do not exceed 5 PSI when pressurizing the SUMA.
Page 52
Air Valve
Figure 62. The air valve location
Figure 63. Pressurizing the SUMA using a pump with gauge
Confidential – Limited Distribution