Safety; Restricted Access; Electrical Safety; Covers And Panels - Optex Fiber SenSys Terrain Defender TD 100 Installation Manual

2. Safety

As comprehensive as these manuals are, TD100 is intended to be installed by trained
professionals having experience in security system construction and safety.
The following icons may appear throughout this manual:
CAUTION: Identifies conditions or practices that could result in damage to equipment
and/or loss/contamination of data.
WARNING: Identifies conditions or practices that could result in non-fatal personal
injury.

Restricted Access

The TD100 (and associated accessories such as TD24PSU, TD48PSU, and TDR8) is intended
only for installation in restricted access locations, where access is restricted using a lock and
key (or other means of security) controlled by the authority responsible for the location, and
where access can only be gained by service persons or other users who have been instructed
about the reasons for the restrictions applied to the location and about any precautions that
need to be taken.

Electrical Safety

If the TD100 is damaged or malfunctions, disconnect power to the APU. Do not use the APU if
any of the following conditions exist:
• It is visibly damaged.
• It does not operate as expected.
• It has been subjected to prolonged storage under adverse conditions.
• It has been damaged during shipment.
Do not put the TD100 into service until qualified service personnel have verified its safety.

Covers and Panels

There are no user-serviceable parts inside the TD100. To avoid personal injury, do not remove
any of the TD100's covers or panels without being instructed to by Fiber SenSys. The product
warranty is void if any factory seal is broken. Do not operate the product unless the covers and
panels are installed. The TD100 has an internal tamper switch that registers the removal of the
TD100 cover.
Page 20
Confidential – Limited Distribution