Swing Wall Preparation - KidKraft CASTLEWOOD Installation And Operating Instructions Manual

Step 3: Swing Wall Prep
Part 1
It is important to assemble the frame on a flat, smooth surface.
A: Place (2757) LT Post Assembly and (2758) RT Post Assembly on a hard, flat surface with the notches facing
down. The top of the post assemblies have the longer notches. (fig. 3.1)
B: Tap 1 (TN2) T-nut in the top holes and 1 (TN1) T-nut in the middle and bottom holes. (fig. 3.1).
Fig. 3.1
Top
Notice longer
notches at
the top (both
boards)
Wood Parts
1 x LT Post Assembly
2757
1 x RT Post Assembly
2758
TN2
2758
2757
TN1
Notice shorter
notches at the
bottom (both
boards)
Hardware
2 x T-nut
TN2
4 x T-nut
TN1
23
Bottom