KidKraft CASTLEWOOD Installation And Operating Instructions Manual page 49

Step 18: Roof Assembly
Part 2
C: Place 1 Roof Support Assembly against one side so the peaks meet and the ends of the roof supports are
flush with the ends of the roof panels. Attach with 8 (S11) Wood Screws. (fig. 18.4)
D: Attach the second Roof Support Assembly on the opposite side, peaks to meet and ends are flush with 8
(S11) Wood Screws. (fig. 18.4)
Fig. 18.4
Flush
Back Roof
Panel
Flush
S11
S11
(hidden)
Hardware
16 x Wood Screw
S11
49
Roof Support
Assembly
Flush
Front Roof
Panel
Flush
Roof Support
Assembly