KidKraft CASTLEWOOD Installation And Operating Instructions Manual page 20

Step 1: Front and Back Wall Prep
Part 2
It is important to assemble the frame on a flat, smooth surface.
D: Turn the assembly over, place (2774) Upright in the middle groves of (2775) Panel Cross Support and (2772)
Panel Floor Support then attach all boards with 8 (H9) Hex Bolts (with lock washer and flat washer) connecting to
the previously installed t-nuts. (fig. 1.3 and 1.4)
E: Repeat steps A-D for a second assembly.
Fig. 1.3
2775
2770
Wood Parts
2 x Upright
2774
H9
x 3
2774
Fig. 1.4
LW1
2771
Flush
Hardware
16 x Hex Bolt
H9
(lock washer & flat washer)
20
H9
x 3
2772
H9
FW1
H9
x 2