Attach Tnr Brace Assembly - KidKraft CASTLEWOOD Installation And Operating Instructions Manual

Step 36: Attach TNR Brace Assembly
A: Use (8965) TNR Upright as a guide to judge the proper bolt location, remove the bottom pan bolt and nut.
The bolt will no longer be needed, but keep the lock nut. (fig. 36.1 and 36.2)
B: Attach the top of the TNR3 Post Mount to TNR2 Slide Clamp Ring using 1 (PB2) Pan Bolt (with the
previously removed lock nut and 1 flat washer). (fig. 36.2)
C: Insert TNR3 Post Mount on (8965) TNR Upright, pre-drill with a 1/8" drill bit then attach with 2 (S6) Pan
Screws. (fig. 36.2)
D: Remove (H8) Hex Bolt from bottom of (2771) End Post then attach (8963) TNR Ground Brace flush to the
bottom of (2618) Front Back Panel with 2 (S11) Wood Screws and 1 (S4) Wood Screw. (fig. 36.1 and 36.3)
Fig. 36.1
2771
Remove PB1 (Pan Bolt)
first then install PB2
Pan Bolt with previously
removed lock nut)
Remove H9 (Hex Bolt)
first from post then
attach TNR Brace
Assembly
8965
TNR Brace
Assembly
1 x Pan Bolt (flat washer, lock nut - previously removed)
PB2
2 x Pan Screw
S6
1 x Wood Screw
S4
2 x Wood Screw
S11
Fig. 36.2
TNR2 Slide
Clamp Ring
PB2
Fig. 36.3
S11
Hardware
74
FW1
LN1
8965
S6
2771
S4
Other Parts
1 x TNR3 Post Mount
TNR3 Post
Mount
8963