Quality Information - EDER ALGEMA-FITZEL BLITZLADER 2 Operating Instructions Manual

Eder GmbH

7.3 Quality information

The following aspects are not deficiencies:
– Humidity
– Light scratches
– Visually altered surfaces
1. Humidity
Because tarpaulin frames, toolboxes and attachments are not thermally insulated,
condensation can form under tarpaulin covers, in toolboxes and in attachments.
Water can penetrate at openings such as doors, flaps and lids.
2. Light scratches
In the production of our superstructure, EDER GmbH takes care not to scratch surfaces.
However, as the body is a handmade product, slight scratches on surfaces may occur
during assembly. These scratches do not impair the function and are therefore no reason
for complaint.
3. Visually altered surfaces
Aluminium profiles may differ slightly in colour. The discolouration is due to the material
and does not affect the use and safety of the vehicle and is therefore not a reason for
complaint.
Aluminium parts are not resistant to certain aggressive chemical substances such as acids.
Road salt in winter or aggressive dirt must be washed off thoroughly with clear water
immediately after the end of the journey.
Due to the nature of the material, rubber surfaces can shrink slightly over time.
Operating Instructions Algema Blitzlader 2 Air - Edition
7 Additional
83/ 100