EDER ALGEMA-FITZEL BLITZLADER 2 Operating Instructions Manual page 43

Eder GmbH
Possibility 1:
•
Body functions in the cab deactivated
•
Switch off the ignition of the base vehicle.
•
Switch on the ignition of the base vehicle.
•
Activate the body functions in the driver's cab. The hand control panel on the outside
left is active.
•
If you want to continue working with the radio remote control, activate the radio
remote control either on the touch panel or with the Start button (1).
Possibility 2:
•
Body functions in the cab deactivated
•
Activate the body functions in the driver's cab. The hand control panel on the outside
left is active.
•
Briefly operate a function on the hand control panel at least once.
•
If you want to continue working with the radio remote control, activate the radio
remote control either on the touch panel or with the Start button (1).
See also "Tilt plateau operation", page 21.
If the emergency stop function has been activated, the manual control
panel is also no longer active without a reset.
8-channel radio remote control*:
An 8-channel radio control system is also available as an option instead of the 6-channel
radio control system shown (not illustrated). The channels 1 to 6, the buttons Start, Stop
and the emergency stop function are functionally identical to the described 6-channel radio
remote control. In addition, the rotating beacons* and the work lights* can be switched on
and off with the buttons on channels 7 and 8
ambient lighting front* and rear*", page 44).
Operating Instructions Algema Blitzlader 2 Air - Edition
(see "Rotating beacon*, work lights* and
4 Operation and use
43/ 100