EDER ALGEMA-FITZEL BLITZLADER 2 Operating Instructions Manual page 40

4 Operation and use
The ball bar is not mounted correctly!
Use of additional tools or aids when mounting the ball bar!
The plateau is tilted up with the ball bar mounted!
40/ 100
The ball bar can come loose while driving.
After mounting the ball bar, check carefully that the white
marking is in the green area, the handwheel is in contact with
the ball bar without any gap, the locking cylinder is locked and
the ball bar has no play in the holder.
The ball bar could be damaged and come loose during trailer
operation.
°Do not use any additional tools or aids to mount the ball bar.
°Clean the ball bar, the locking mechanism and the receptacle if
the ball bar cannot be mounted by hand.
If the ball bar cannot be fitted without tools or auxiliary
equipment, the trailer coupling must be repaired by a specialist
workshop.
The ball bar touches the ground and the plateau cannot be tilted all
the time.
The plateau and the trailer coupling could be damaged.
°Always remove the trailer hitch when it is not needed.
°Before tipping up the plateau, check that the ball bar is
dismantled.
Operating Instructions Algema Blitzlader 2 Air - Edition
Eder GmbH