Loading With Winch - EDER ALGEMA-FITZEL BLITZLADER 2 Operating Instructions Manual

4 Operation and use
Non-adapted steering movements when loading!
•
On the loaded vehicle, apply the parking brake and engage the lowest gear or, in the
case of automatic transmission, move the selector lever to the P position.
•
Tilt the plateau and retract
•
Secure the loaded vehicle

4.1.6 Loading with winch*

Unintentional rolling back or acceleration of the vehicle to be
loaded!
26/ 100
The vehicle to be loaded can fall from the ramps or from the plateau.
Drive the vehicle straight onto the car transporter, call in a guide
if necessary.
the ramps
(see "Securing the loaded vehicle", page 23).
Get out of the loaded vehicle!
Fall from the plateau.
° When getting out of the loaded vehicle, hold on to the handholds
provided in the area of the driver's door, on the door frame or
on the roof.
Only leave the plateau when it is tilted backwards.
°If necessary, close the driver's door of the loaded vehicle
after tipping it off the ground.
People can be hit or run over.
°During loading, no persons are allowed on the platform, the
ramps or behind the car transporter.
Operating Instructions Algema Blitzlader 2 Air - Edition
(see"Tilt plateau operation", page 21).
Eder GmbH